Best Boots For Working On Concrete Floors - A Practical Guide For Men


Working on a concrete surface all day is challenging. It takes more endurance than most people think. If your work involves a lot of walking, you should take frequent breaks to give your feet a break and avoid sores and lower back pains. Regular breaks are also required even if you do not do a lot of walking to relax and ease your feet.

 

This guide will equip you with areas to consider when searching for boots to work on concrete floors.  It will enhance your ability to get better footwear to cope with your work floors and environment.  Concrete is a hard surface and is slippery when wet. A smooth concrete surface has a low level of grip. An ideal boot should be safe, comfortable and have a slip resistant sole.  

These Are The Best Boots For Working On Concrete Floors

5.0
5
1 - Timberland PRO Men's 6 Pit Boss Steel-Toe
1. Timberland Pro Men's 6" Pit Boss Steel-Toe

Tough and hard-wearing boots designed to see you through the job in comfort. They are suitable for demanding work environments and are easy to break into.

  • Steel toe 
  • Slip resistant
  • 100% leather, rubber sole
2 - Caterpillar Men's Second Shift Steel Toe Work Boot
2. Caterpillar Men's Second Shift Steel Toe Work Boots

Durable ruggedly styled heavy duty boots which offer protection against tough environments and electrical hazards. They are comfortable, water resistant and breathable.

  • Steel toe and steel shank
  • Oil resistant outsole
  • 100% leather, synthetic sole
3 - Bates Men's Gx-8 Gore-Tex Waterproof Boot
3. Bates Men's Gx-8 Gore-Tex Waterproof Side Zip Boots

Comfortable, lightweight and supportive boots suitable for being on your feet for long hours.  The side zip off convenient quick on and off facility.

  • Non-metalic composite toe
  • Slip resistant outsole  
  • 70% leather, 30% nylon, rubber sole
4 - Danner Men’s Tachyon 8” GTX Duty Boot
4. Danner Men's Tachyon 8" GTX Duty Boots

Durable, lightweight, tactical and functional. Their design is inspired by athletics. They are waterproof, comfortable and will offer all day traction.

  • Polishable leather toe 
  • Water resistant rubber outsole 
  • 100% leather, rubber sole
5 - Rocky Alphaforce Waterproof Duty Boot
5. Rocky Alphaforce Waterproof Duty Boots

Tough waterproof boots with a shock absorbing footbed. Very comfortable and suitable for walking on concrete surfaces all day.

  • Non-metalic stabilizer 
  • Oil & slip resistant outsole 
  • 100% leather, nylon, rubber sole
6 - EVER BOOTS Tank Men's Soft Toe Oil Full Grain Leather Insulated Work Boots Construction Rubber Sole
6. Ever Boots "Tank Men's Soft Toe Oil Full Grain Leather Leather Work Boots Construction Rubber Sole

Comfortable big fitting boots built using the durable Goodyear Welt Construction method. They are light high quality great value for money boots which come with a 3 month manufacture warranty.

  • Steel shank in arc to reduce pressure
  • Oil and slip resistant outsole 
  • Leather, rubber sole
7 - EVER BOOTS Ultra Dry Men's Premium Leather Waterproof Work Boots Insulated Rubber Outsole
7. Ever Boots "Ultra Dry" Men's Premium Leather Waterproof Work Boots Insulated Rubber Outsole

Light weight big fitting boots designed to stay dry in cold and wet weather. Suitable for heavy duty construction, hiking, farming. 

  • Composite toe
  • Slip resistant 
  • Leather, rubber outsole
8 - Caterpillar Men's Threshold Waterproof Steel Toe Industrial Boot
8. Caterpillar Men's Threshold Waterproof Steel Toe Industrial Boots

Light weight, stylish and comfortable. They are breathable and have an abrasion resistant upper leather and with a double stitching.

  • Steel toe 
  • Slip resistant outsole
  • 100% leather, textile, rubber
8 - Wolverine Men's Overpass 6 Composite Toe Waterproof Work Boot
9. Wolverine Men's Overpass 6" Composite Toe Waterproof Work Boots

Engineered for flexibility to allow for free comfortable movement without compromising support and durability. These boots are waterproof, light and warm.

  • Composite toe
  • Slip, oil and chemical resistant
  • 100% leather, textile, rubber sole
10 - ROCKROOSTER Work Boots for Men, Steel Toe, Non-Slip Pull On Safety Shoes
10. Rock Rooster Work Boots for Men, 6 inch Steel Toe, Slip On Safety Oiled Leather Shoes, Static, Dissipative, Breathable Quick Dry

Outstanding, safe and comfortable slip on work boots. They look good for office meetings and are up to the job in various  areas including construction sites,  warehouses, and manufacturing.

  • Steel toe
  • Slip and oil resistant 
  • Leather, synthetic sole
safety boots

A Men's Guide To Buying Boots For Working On Concrete Floors


Most men who work on construction sites, roads and similar jobs face a number of risks. Generally, this type of heavy work combines noisy machines, earthmoving equipment, construction vehicles, and risks of falling, trampling, cutting, crushing, tripping and other possible accidents that can occur in this type of work. It is therefore important to have the right footwear to carry out this type of work on concrete floors and minimize the risks. Generally in this type of work for example in engineering, work procedures are safe and protective equipment is used to minimize risks and hazards.


Footwear is one of the most important components of industrial safety and hygiene and it helps keep workers more productive. Having suitable footwear for working on concrete floors is not only important to prevent accidents, but also enables workers to maintain good posture and health. It also reduces fatigue and sprains.

Ready for work footwear

1. Getting the Fit Right


The main thing to consider when buying men's boots for working on concrete floors is that they have a proper fit. Many over emphasize steel toed boots even if this is not essential for their work. Before focusing on steel toes, it is critical to consider whether the boots chosen will fit perfectly or not. This means that the foot must have space for the toes and that the ankles must also have a certain amount of clearance so as not to restrict the circulation blood. If you decide to buy steel-toed boots, please bear in mind that these tend to be made of leather and are therefore a bit more rigid. This will take away some flexibility when it comes to supporting your weight. You should not exaggerate the looseness of the fit, since if it is too big it could cause falls or imbalances.

Nowadays not all men's boots for working on concrete floors are made of leather, some are made of synthetic materials, combining nylon with hides or skins, allowing them to be more flexible and easy to wear.

heavy duty footwear

2. How Boots Protect Workers


When it comes to shoes for working on concrete floors, steel-toed boots offer some of the best options. Some of them are waterproof, others have special soles and others have features which adapt to all types of feet. They protect your feet from various risks including crushing, impact, trapping of toes and in more extreme instances fractures of feet or toes.


Leather boots have the longest life span. They protect more against cuts and abrasions. Higher boots protect against sprains and avoid sprains of the ankle, while providing better support for posture. Spongy or cushioned insoles also tend to provide greater comfort and prevent fatigue. If you prefer and if your job allows, you can opt for low-cut boots. These allow for greater mobility and flexibility to the ankles and therefore can move better. Deep or non-slip soles are also a great compliment. They prevent tripping, slipping and falls.

tight grip footwear

3. Choosing the Right Brand of Construction   Work Boots


Men's boots for working on concrete floors should not be chosen as just another shoe. This type of shoe should be seen as a safe investment that will protect you from possible accidents at work and you should also select the one that best suits you and your type of work. This is not a sneaker that you can buy cheaply and it does not matter how long it lasts, but it is an industrial garment that must maintain an excellent quality-price ratio to exceed any work expectations. Therefore, if you are going to buy a pair of boots for your work on concrete floors, you should be aware that you have to spend at most about $200, but do not rush to buy $60 or $90 models, as they might not be the right ones. A maximum price of $200 would cover the basics of excellent heavy-duty footwear and maintains a guaranteed price/performance ratio.


Among the most recognized brands in the market for industrial jobs, you can find Bates, Wolverine, Timberland, Danner, Rocky and Caterpillar. Surely you will find a model in these brands that you like, and that fits your needs, your foot and especially your budget. If these options do not meet your requirements, you can also look for some of these brands that in many instances offer cheaper very good quality boots; KEEN Utility, Thorogood Men's and DRKA.


The manufacture of boots is also an important factor to consider when buying boots for concrete floor work. Whether it is the more expensive model, the redesign it might have, or the repairs it might have in the future are things to consider. The cheaper models include a cement construction and direct fastening, where the two parts of the shoe are molded directly. The more expensive stitch-down method of construction  involves stitching the upper to the sole. It makes the shoes tough, water resistant and easy to re-sole and repair.

nice footwear

4. Summary and Conclusion


Boots for industrial work such as working on concrete floors are of vital importance for effective personnel protection. If you spend most of your day on your feet and rely on the protection and support provided by safety boots with steel toes, non-slip soles, waterproofs, etc., you will realize what a big difference in hygiene, safety, and health they make for you.


In addition, safety boots or heavy-duty boots should be an indispensable item of clothing for workers on concrete floors and in all types of industrial or construction work as these jobs involve risks and physical strain. So if you are working in this type of activity and want to be better insured, look for your heavy duty boots now and stay safe.

construction site

Working On Concrete Floors All Day - Practical Tips For Men


Concrete floors are very typical feature in industries, warehouses and construction sites. Concrete is rigid and every person who works on it all day is at risk of affecting their health.

Walking and or standing all day can cause pain especially on feet, knees, hips, and the back. Over time, joints may begin to inflame leading to chronic diseases. For this reason, it is essential to take precautions to avoid these kinds of occupational diseases and stay safe and healthy. In response to this problem, this brief guide gives you top tips to you can use as you work on the concrete floor all day to decrease the risk of pain, discomfort and disease in your body.


A. Footwear and insoles


First and foremost, the footwear is the main thing. There are specific features you should consider in footwear to pick a quality one. You should look for footwear with enough cushioning to withstand pressure and stress in your feet. The footwear has to offer you enough support for your feet and your ankles.

You need to search for boots specially designed to offer you all the features you need to avoid injuries. These particular boots need to give to your feet stability and should ideally have thick soles which offer the best support to your arches. The boots should be light weight and breathable and slip resistant.

The size of the boots is critical, tight or loose boots can cause injuries and bunions due to the effects of friction of your feet against the boot surface. Every foot is not the same. For this reason, you probably need additional insoles. Most boots have designed with removable insoles to allow you to their orthopedic insoles if necessary. In this way, you can stay more comfortable while working on concrete floors all day.


B. Position changes


The main problem with concrete is its hardness. For this reason, when you keep a single position, you wear down your joints and tire your muscles. Standing or sitting still in the same position affects your circulatory system, and your feet and ankles can inflame.

The main recommendation to avoid this kind of injury is continually changing your positions, as sitting down or standing up for a few minutes several times in the day. If you do not have the possibility of sitting in your workplace, you can make a static move while you are standing, for example, stand on the balls of your feet or make little jumps to move your muscles and improve your circulation.


C. Replace your boots when it is necessary


The recommendation is replacing your boots every six months because, over time and use, they lose their capacity to offer you maximum support and cushioning. Another option is to have an extra pair of boots, to rotate it, in this way, your boots will not lose their qualities so quickly, and your body is going to thank you.

pouring concrete

How Long Before Walking On Concrete


How long is it necessary to let the concrete dry? Is one of the most frequently asked questions on construction sites. Sometimes when people do not know the answer to this question, they let the concrete dry for more time than is necessary and even wait for a week to walk on it, just in case.

As this is a question which concerns many people, we bring you the information you need to make informed drying time estimates. You probably recognize that there is no specific waiting time that can be precisely provided here as this will be affected several unique and specific factors.


A. What is to cue concrete?


Concrete curing, is the process of maintaining moisture and the right temperature, until the concrete reaches the level of resistance and quality expected. It is necessary to preserve a balance with water we use to keep moisture because low moisture will make concrete dry very fast, and it will have low quality. Otherwise, if you add too much water, the concrete mix will weaken and increase the possibility that cracks and flakes will appear in the concrete.


B. When is concrete is ready to walk on?


Curing concrete process is very prolonged because it keeps hardening a little bit every day. As we said before, water is critical to concrete curing processes because each water molecule reacts with concrete, and makes it harder. Even when we think concrete has reached a total resistance and strength, it can get a little bit harder.

The time you should wait for concrete is fully ready depends on the purposes you want to put it to. To do any walking without leaving any footprints or marks, you should let the concrete surface dry up for at least 24 to 48 hours.

On the other hand, you should wait until 7 Days has passed before you drive on it, in this time, the curing process of concrete will have reached its 70 percent of resistance and strength. You should avoid driving heavy vehicles at this point so that the concrete does not lose its shape. If you want to do any activity in the concrete, you have to wait for 28 days for it to be fully hardened.


C. Factors which affect concrete's drying time


Several factors affect the fresh concrete floors’ drying time, and for this reason, the time you need to let the concrete dry can vary, and you must adjust the drying time. As highlighted before, moisture and water affect a lot of concrete drying time. This water-concrete relation can accelerate or slow down the drying time and quality.

Temperature plays a key role in the concrete’s drying time. High temperatures speed up the drying process. To help speed up the drying process, you can use a special blanket to keep concrete hotter.

Finally, the composition and concentration of the concrete mix will also can affect drying time. Different compositions and concentrations for your driveway, parking, flooring or slab will either reduce or speed up the concrete’s drying time.

laying concrete

How To Get Dried Concrete Off boots - A Cleaning Guide


One of the most common problems of work in a construction environment is dried concrete and cement stains. Concrete splashed or drops onto boots then sticks on them before drying up. You usually will not notice when concrete splatters or stain while working. For this reason, it’s quite common that at the end of the working day you bring back home footwear with extra layers of concrete.


It is essential that you know the best ways to clean up of concrete stains, to guarantee that your work boots will last longer. Most workers usually worry about the damage cleaning chemicals can do to their boots while they are trying to get rid of the “noisy” concrete stains. Fortunately, we bring you this easy boot cleaning guide to remove all the concrete stains from your boots with your own hands in the comfort of your own house.


A. What do you need to get dried concrete off boots?


Before starting with the tips and instructions about how do remove dried concrete of your boots, it is essential to have all the needed materials at hand. Firstly, you need a little brush with hard bristles. Secondly, you need a blunt knife to eliminate pieces of concrete off your boots. Thirdly and finally, you need a powerful detergent to wash your shoes and finish cleaning them.


B. How to remove dried concrete?


Now you have all the things you need at hand, it is time to remove the dried concrete off your boots. You should know the difference between dry concrete dust stains and solid concrete rests.


During the initial parts of the cleaning process, it is essential that you avoid getting the concrete dust wet at all costs. If you soak the concrete powder, it is going to activate and get solid into boots fibers, and your boots will be damaged.


In the same way, with solid concrete residues, the recommendation is to initially avoid getting the boots wet. However, the difference between these hardened stains or residues and powderish concrete stains/dust is that you should first lift them away with a blunt knife. Try  not to rub against them (dry concrete residues/rests), because if you rub your boots at this stage, concrete is going to aggressively get into your boots’ fibers. Once you have removed all the solid concrete rests/residues, you can clean your boots the same way as you clean powder concrete stains.


The next step is to use the hard bristles brush to remove all the concrete powder and rests off your boots. You should rinse your boots in a lot of water. Do not worry if boots are leather because water is not going to ruin them. Water is necessary to dilute concrete dust rest and avoid concrete hardens.


Finally, you have to wash them (boots) as your regular shoes with strong detergent or soap to remove all the dirt and let them dry in a safe place far away from sunlight. If you follow all these recommendations, you are going to be capable of easily cleaning your boots every time you work with concrete and make them last for a long time and enjoy using them.



working on concrete boots

Construction Site Hazards And How To Reduce Them


Each construction site has its own hazards. These hazards are present because generally, there is heavy machinery, huge tools, and risks of falling objects in each construction site.   All these factors add risks to the daily shift of workers, and it makes supervisors and site safety managers stay continually concerned about the security of all people on their sites.


There are common hazards shared by every construction site. These are well documented and avoidable if laid down procedures are adhered to. The main goal of supervisors and site safety managers is to reduce risk and severity and frequency of injuries and work related accidents. They also seek to avoid unnecessary litigation and costs associated with injuries and accidents.


The construction industry has a relatively higher likelihood of serious accidents than an average industry. The construction environment is remarkably dangerous, but if you take the right precautions, you can make your site a safer place to work and avoid every hazard. This guide gives you the most common construction site hazards and how to reduce them.


A. Dangers of heights


According to the Health and Safety Executive (HSE), heights accidents are the most frequent cause of serious injuries. Workers who use scaffolds to do their job are some of the most exposed individuals because of the high risk of falling and hazards associated with poorly set up or damaged scaffolds. They can touch electric cables risk getting electrocuted.

To reduce height related accidents, you have to work on heights only if it is strictly necessary. If there are tasks you can do on the ground, you should do them on the ground.


You should use safer equipment, for example, there are double guard-rail scaffolds that, protect height workers from dangerous falls. An extra precaution to reduce height related accidents is to implement a security net. In this way, you will be safer, and the number of height related accidents is going to decrease.


B. Be careful where you move


A construction site is full of movement of both people and machinery, making this environment a dangerous place. When workers move construction material, use diggers or lifting equipment, they expose to all others to different hazards. For this reason, all workers have to be well versed on the site movement protocols and stick to them.


Each individual should avoid working near the area where there is equipment moving or transporting construction materials except where this is strictly necessary and the individual is fully aware of the risks involved and how to avoid them. All workers on a site must use personal protective equipment, specially designed to make workers safe and more visible.


C. Is it possible to avoid slips?


Slips are accidents that can happen in every work environment. However, a construction site has irregular terrain, which makes slips more probable. In this environment, buildings or structures of different heights can be found – which represent another risk.

The best way to avoid slips in a construction site is to reduce the risky areas. As it is not possible to fix the irregularity of the terrain, you should create safety walkways to allow for low risk movement. Non slip boots should be worn to reduce the risk of slippage.


Before any work can be done on a site, a thorough risk assessment of the site must be done to assess all the known hazards and put in place mechanisms to mitigate them. Everyone who works on a site must be made aware of the hazards and how to deal with them. On an ongoing basis, risks must be reported documented and their knowledge shared to keep everyone informed and alert. Finally health and safety is everyone’s job. You must play your part to ensure that you work in a safe environment.